Real, first ride

This time I fully configured the CA to take over completely.
Now that I was fully exposed to the capabilities of the CA, I am so happy that I decided to purchase it, it was indeed worth every single dime. GrinTeck rulez, no questions. To ride w/out one of these is of course possible, but you ride with so little control over your system (basically the only control is the throttle) it's simply not the way to go.
Here's just some of what you get with the CA:

• Nice, big, illuminated display of current battery voltage, kph, Wh/Ah being drawn, motor temperature.
• Limit system by: amps / watts / speed. No need to touch the controller's firmware anymore.
• Stabilize the throttle signal ("ramp up") - this is a big thing. Without this, every slight turn of the throttle makes the motor kick the bike forward, and with a powerful motor such as this, it's not pleasant at all. With the ramp up, it's smooth, the rider doesn't have to worry about not turning the throttle too much. The throttle can be twisted all the way up, and when reaching the desired speed you just let go a little.
• Back down the throttle if motor's temperature passes the limit.

I don't know why exactly I topped at ~50kph at the previous "first ride", but this time after flushing the controller's firmware the wheel had no problem spinning at 100kph (in the air, that is). I managed to get at 65kph on the road and that's a scarry f***ing speed to be at. Well... I remember feeling that about 30kph when I just started with the 400W bafang on the gary fisher, so times will tell on that one :)

Here's how the settings look like.

 
It was INSANELY fun to match speed with cars (keeping a safe distance of course). Later I went back to the age of 10 and started racing other cyclists. The race took exactly three seconds, after which they were far off in my rear view mirror.
 
I had a fantastic ride. This is true mobility, at a decent cost.

Towards the end is was less fun - I opened the throttle all the way to gain some speed and held it there. Then I let go of the throttle but the bike kept...accelerating! I got all confused because it happened so fast. I tried to brake but that only slowed the bike down to some degree and immediately there was a turn that I had to take, that I lost control over the bike and fell down on the side. Luckily, it ended with no more than a few bruises.
What happened was that the auto cruiser kicked in, it just happened at an "inconvenient" time that I didn't react to that normally. I picked myself up really fast and disappeared from the scene, and proceeded to immediately turn the auto cruise off, limit the speed to 50kph (which is already a lot), and limit the amps & watts.
Now, this accident I had with the floor wouldn't have happened at all had I installed the e-brake sensors. It shouldn't have happened.
I was so eager to test the bike that I thought I could manage with just letting go of the throttle would do. Now I'm angry at myself, I don't like falling and seeing myself fail like that. It was a sweet, sweet ride and I ruined it. It was stupid, reckless, and definitely not according to the plan. So there's a lesson for you boys and girls, protection is paramount.
 
All in all, I put in an immense amount of work in this project over the past three months (and I'm in huge debt to the wife for this) and now's the first time I'm getting something back.
 
Insights:

  * 5kW is INSANELY ALOT. It's only for accelerating really fast or with steep hills. 3kW are more than enough for maintaining a very decent speed and having climbing ability.
  * 50kph is so damn much too, it's scary. Good thing I chose a beast like the Demo8 as basis. As I said, don't know yet if I ever want
    more than this speed.
  * The Crystalyte H40 is a beast. It could be above my needs, but on the other hand it just means that it'll be indestructible.
  * I have to learn all the dynamics that come with highspeeds, this is no childsplay.
  * Bike / fuel tank / motor can withstand crashes :)